Active Cleaner is designed for periodic cleaning (once a week or once a month depending on how heavy the use is) of vinyl dance flooring (not for use on Acti Flex wood) and will help maintain the protective polymer sealer on the surface of the flooring.  We recommend that for more regular cleaning, such as daily cleans, that a close to PH neutral cleaner is used such as an every day vinyl floor cleaner - e.g. a Flash all purpose cleaner.

Removes Covid-19 residue on floor surfaces 

Initial cleaning after installation

Remove coarse dirt with a sweeping brush or vacuum cleaner.

Dilute Active Cleaner R280 with water in a ratio of between 1:5 and 1:10. For low levels of building dirt adjust the strength of the solution as appropriate.

Apply the cleaning solution to the floor with a mop, pad or cloth and distribute evenly.

Allow to stand for approx. 10 minutes and clean the floor surface using a scrubber or Monodisc SRP1 (with suitable pad or scrubbing brush).

Take up the loosened dirt with a Spray Extractor fitted with a hard floor adapter or with a rubber blade and an absorbent wide-headed mop.

Mop the floor with clear water until completely neutralised and dry.

Coverage: 100m2/L

Periodic Cleaning

Dilute Active Cleaner R280 with water in a ratio of between 1:50 and 1:100. Although in cases of only slight soiling, dilute 1:200.

Apply the cleaning solution to the floor surface using a scrubber or Monodisc SRP1 (with suitable pad or scrubbing brush).

Take up the loosened dirt with a Spray Extractor fitted with a hard floor adapter or with an absorbent wide-headed mop.

Mop the floor with clear water only until completely dry.

 Coverage: 400m2/L